2019 MERCEDES-BENZ C 300 4MATIC

The auction lists this 2019 Mercedes-Benz C 300 as Salvage with “Front End” as the primary damage. Visible front-end collision damage supports the unverified Front End primary-damage claim; however, the generic Salvage status cannot be independently confirmed from the photos. The front bumper cover and lower front fascia are missing, exposing the grille support, radiator-area components, brackets, mounting points, wiring, and a rectangular electrical module. The center grille is severely displaced, with broken or missing surrounding trim and an open emblem area. The hood’s leading edge is severely creased, buckled, crushed, and folded across the front, particularly on the left and right portions, and it does not align with the grille opening. Both front corners have missing bumper and corner trim, with internal components and mounting structures exposed. The vehicle’s left front headlamp area has a large open gap and visible adjacent mounting structure. The left front fender and wheel-arch edge are deformed and separated from the lamp and front-end components. Wiring is hanging below the grille area. The visible damage is concentrated at the front end; the provided findings do not establish the condition of the engine, transmission, cooling system, steering, suspension, airbags, or underlying structural members. A complete physical inspection and diagnostic scan are recommended before purchase or repair. The VIN decodes as a 2019 Mercedes-Benz C-Class C300-4MATIC convertible/cabriolet, built in Germany. It is equipped with a 2.0-liter, four-cylinder gasoline engine, a seven-speed automatic transmission, and all-wheel drive. NHTSA records show multiple recalls associated with this model and year, including recalls involving the eCall communication system, roof-panel bonding on applicable vehicles, steering-rack components on applicable rear-wheel-drive vehicles, forward-collision radar software on vehicles with the relevant driver-assistance equipment, the 12-volt battery mounting bracket, front seat-belt retraction, headlight adjustment, the fuel rail and injectors, and rearview-camera software. Recall applicability and completion should be verified by VIN with Mercedes-Benz or an authorized dealer before the vehicle is operated.