2017 MERCEDES-BENZ C 300 4MATIC

The 2017 Mercedes-Benz C 300 is listed with a Salvage condition and “Front End” as the auction’s primary damage classification. The visible missing and damaged front-end components support the stated Front End classification. However, the Salvage title status cannot be confirmed from exterior photographs alone. The front bumper cover, grille assembly, and both headlamp assemblies are missing. This leaves the bumper reinforcement, radiator, cooling components, mounting areas, and front-corner cavities exposed. The front edge of the hood has uneven raised sections and irregular gaps, while the outer edges of the front fenders around the headlamp openings are bent and irregular. Loose wiring and detached components are hanging in the open lower front fascia area. These findings indicate substantial front-end damage and incomplete or disassembled components; the condition of concealed structural, cooling, electrical, and safety systems is not established by the available findings. A narrow red surface scuff is also visible on the left rear bumper near the wheel opening. VIN decoding identifies the vehicle as a 2017 Mercedes-Benz C-Class sedan, C300-4M trim, with a 2.0-liter four-cylinder gasoline engine and automatic transmission. The vehicle was manufactured by Mercedes-Benz Cars in Vance, Alabama, USA. The decoded equipment includes standard ABS, electronic stability control, traction control, forward collision warning, blind-spot monitoring, and a rear visibility system; some additional driver-assistance features are listed as optional. The VIN decode does not provide a confirmed drivetrain value, although the trim is recorded as C300-4M.