2019 MERCEDES-BENZ AMG GLE 43 COUPE 4MATIC

The 2019 Mercedes-Benz AMG GLE 43 Coupe is listed by the auction with Salvage status and “Front End” as the primary damage classification. The visible evidence strongly supports the stated Front End damage code; however, the Salvage status itself cannot be verified from photographs alone. The front end has sustained severe collision damage. The bumper cover, grille, and several lamp-surround and fascia components are missing, leaving the radiator, condenser, wiring, and front support components exposed. The front bumper reinforcement is visibly bowed, bent downward, and uneven. Front-corner supports and mounting areas show broken, detached, or displaced metal and plastic components, with loose wiring and parts hanging in the open front section. The exposed radiator and condenser cooling-pack fins show localized deformation. The washer-fluid reservoir is detached and hanging below the front-right corner. One front lamp assembly is detached, while the front-left headlamp is missing entirely. The hood has severe creasing and deformation along its front edge and corners. The front fender edge around the wheel opening is torn or irregular, and the wheel-arch trim is missing or detached and hanging beside the front wheel. The driver steering-wheel airbag is deployed, indicating that the restraint system will require assessment and repair. The visible brown leather front seat also has minor localized scuffing and discoloration. According to the VIN decode, this is a GLE-Class multipurpose vehicle with the AMG GLE43 trim, a turbocharged 3.0-liter six-cylinder gasoline engine, and a nine-speed automatic transmission. It was manufactured by Mercedes-Benz of North America in Vance, Alabama. The available data does not specify the drivetrain. The damage appears concentrated at the front exterior and front-end structure, with missing components, deformation, exposed cooling and electrical systems, and a deployed airbag. A complete physical inspection is required to determine the condition of hidden structural, cooling, electrical, restraint, and mechanical components, as well as the total repair scope.