2019 MERCEDES-BENZ A A220-4M

The vehicle is listed with a SALVAGE CERTIFICATE status and a FRONT END primary-damage classification. The visible front-end damage supports the FRONT END classification. The SALVAGE CERTIFICATE status cannot be confirmed or contradicted from the available photographs. The front-end damage is concentrated on the left side. The left front headlamp housing is broken open, with internal components exposed. The hood has a crease and raised deformation along its left front edge, and the adjacent left front fender is also deformed. The left front bumper cover is torn or displaced, with substantial material missing from the left corner and lower center area. Gaps and components behind the bumper are visible, and a large black lower front panel is detached and lying beneath the vehicle. Surface abrasion is present around the damaged bumper and fender area. The extent of damage indicates that replacement or repair of the front bumper components, lower panel, left headlamp, and likely the affected hood and fender will be required. The condition of underlying structural, cooling, lighting, electrical, restraint, and mechanical components cannot be determined from these findings and should be checked through a detailed physical inspection before purchase. VIN decoding identifies this vehicle as a 2019 Mercedes-Benz A-Class sedan with front-wheel drive, a turbocharged 2.0-liter four-cylinder gasoline engine, and a seven-speed automated manual transmission. The vehicle was manufactured by Mercedes-Benz Cars in Mexico.