2020 MERCEDES-BENZ A A220-4M

The auction record lists the vehicle as “BOS - SALVAGE” with a primary damage classification of “FRONT END.” Stage 1 reports that the visible absence of the front bumper cover, grille, headlamp assemblies, and other front fascia components supports the FRONT END damage classification; however, the photographs alone cannot confirm the BOS salvage designation. The front bumper cover is missing, exposing the reinforcement bar, radiator area, wiring, and other front-end components. The front grille and center fascia panels are also absent, leaving the radiator and internal components visible. Both headlamp assemblies are missing, creating open cavities at the front corners. The lower front fascia and surrounding trim are missing as well, exposing the lower radiator area and attached components. These findings indicate extensive front-end component loss and collision-related damage. Additional mechanical, structural, cooling-system, wiring, and safety-system condition cannot be determined from the provided findings and should be physically inspected. Several light horizontal scuffs are present on the left rear bumper corner. VIN decoding identifies this vehicle as a 2020 Mercedes-Benz A-Class sedan, trim A220-4M, built in Germany. It is equipped with a turbocharged 2.0-liter four-cylinder gasoline engine, a nine-speed automatic transmission, and left-hand drive. The decoded information lists standard ABS, electronic stability control, traction control, curtain and front airbags, side airbags for the first and second rows, a rear-visibility system, pedestrian automatic emergency braking, adaptive cruise control, LED low-beam headlamps, and direct TPMS. The availability and condition of these systems should be verified after repair, particularly because the front lighting, fascia, wiring, and driver-assistance-related components are exposed or missing.