2025 MAZDA CX-50 Premium

The vehicle is a 2025 Mazda CX-50 listed with a salvage certificate and a FRONT END primary-damage designation. Stage 1 reports that the visible crushed hood, damaged front bumper and grille, and separated front fascia support the stated FRONT END code. The salvage-certificate status itself cannot be confirmed from exterior photographs. The front end has severe collision damage. The hood is extensively crushed, with deep creases, sharp folds, and major deformation across the center and both front corners. The front bumper cover is displaced and broken, with separated edges, open gaps, and exposed internal areas. The left bumper corner is pulled away from the body, while the grille is displaced and has broken or missing lower attachments. There is also pronounced separation between the hood, left front fender area, headlamp surround, and bumper fascia. The rear of the vehicle also shows severe damage. The rear windshield is missing, with broken glass fragments around the opening. The liftgate and upper hatch panel are extensively crushed and creased, and the surrounding rear window frame is bent, torn, and uneven. The rear bumper cover is detached and hanging away from the vehicle with exposed components underneath; the right rear bumper corner is also pulled away from the body with separated lower trim. Several restraint-system components have deployed. The driver airbag is deployed from the steering wheel, and the front passenger-side, roof-area, and rear curtain airbags are visibly deployed. The right front seat’s outer bolster is torn, and the driver instrument-panel trim is broken or missing, exposing irregular plastic edges and internal areas. According to the VIN decode, this is a Premium-trim CX-50 SUV with four-wheel drive, a 2.5-liter four-cylinder gasoline engine rated at 187 horsepower, and two rows of seating for up to five occupants. The vehicle was manufactured in the United States by Mazda Toyota Manufacturing in Huntsville, Alabama. The VIN is 7MMVABDM1SN365420. NHTSA records list several recalls applicable to 2025 CX-50 vehicles, with applicability depending on the vehicle’s equipment and VIN: recall 24V649000 concerns the forward-sensing camera and related automatic emergency braking, lane-keep assist, and automatic high-beam functions; recall 25V167000 concerns Mazda Genuine Accessory trailer hitches; recall 25V413000 concerns airbag restraint-control-module software; and recall 25V737000 concerns front suspension fastener bolts that may lead to suspension or wheel detachment. Recall completion and VIN-specific applicability should be confirmed with Mazda or an authorized dealer before purchase. Given the extensive front and rear body damage, missing rear glass, deployed airbags, interior damage, and exposed or displaced components, the vehicle requires comprehensive collision, restraint-system, glass, electrical, and mechanical inspection before any repair or road-use decision.