2020 MAZDA CX-5 Grand Touring

The vehicle is listed with a salvage vehicle title and an auction primary-damage designation of “FRONT END.” Stage 1 reports that the visible crushed, torn, and displaced front-end components support the auction’s unverified “FRONT END” claim; however, the salvage-title status cannot be confirmed from photographs. The front end has substantial collision damage. The hood is creased and deformed along its front edge and right-front corner, with an uneven gap above the grille and headlights. The front bumper cover is severely crushed, torn, and displaced, with multiple sections missing or separated and internal mounting areas exposed. Sections of the lower grille and bumper trim are also missing, exposing fastener points and underlying components. The front bumper corner is separated from the body near the wheel arch, with broken or missing edge sections and exposed mounting areas. The adjacent front fender is creased and deformed around the headlight and bumper junction. Overall, the hood and front fascia are visibly raised, displaced, and structurally incomplete in the photographed areas. The photographs do not establish the condition of components or systems that are not visible, so a complete physical inspection is recommended before repair or purchase. According to the NHTSA VIN decode, this is a Japan-built 2020 Mazda CX-5 Grand Touring SUV with front-wheel drive (4x2), a 2.5-liter four-cylinder gasoline engine, and a six-speed automatic transmission. The decoded vehicle is equipped with features including curtain, front, and side airbags, ABS, electronic stability control, forward-collision warning, lane-departure warning, lane-keep assistance, blind-spot monitoring, and rear cross-traffic alert.