2023 MAZDA CX-30 Preferred Package

The auction record identifies the vehicle as having a salvage title and lists FRONT END as the primary damage. Stage 1 reports that the visible evidence supports the stated front-end damage claim through extensive damage to the hood, bumper, grille, headlamp area, and front fascia. The salvage-title status itself cannot be confirmed from the available photos. The 2023 Mazda CX-30 has severe front-end collision damage. The hood is heavily buckled and creased across its front section, with a distorted leading edge. The front bumper cover is cracked, torn, displaced, and partially separated from the surrounding bodywork. The grille is fractured and detached, while the center-front area is open with internal components exposed. The front fascia has extensive breakage and separation, and the front fender and wheel-arch area show moderate creasing with displaced trim. A front headlamp area also contains broken and displaced components with exposed mounting and surrounding material. The driver’s steering-wheel and lower-dashboard airbags are visibly deployed, with additional deployed airbag material around the driver footwell. The instrument display reports, “Air Bag System Malfunction. Have the Vehicle Inspected.” The restraint system and related safety components will require comprehensive inspection and repair before the vehicle can be considered safe to operate. There is also moderate damage to the right rear bumper corner, including a pronounced dent, crease, and distortion of the surrounding plastic. According to the VIN decode, this is a four-wheel-drive SUV equipped with a 2.5-liter four-cylinder gasoline engine, a six-speed automatic transmission, and a five-seat, two-row configuration. The vehicle was manufactured by Mazda Motor Manufacturing de Mexico in Salamanca, Mexico. NHTSA recall campaign 23V275000 applies to certain 2022–2023 Mazda CX-30 vehicles. The ABS hydraulic control unit may be damaged, potentially reducing braking ability. The stated remedy is dealer inspection and replacement of the ABS hydraulic control unit as necessary, free of charge. The recall completion status for this vehicle was not provided and should be verified by VIN with Mazda or an authorized dealer. A complete structural, mechanical, electrical, airbag, ABS, cooling-system, and alignment inspection is recommended before purchase.