2023 MAZDA CX-30

The 2023 Mazda CX-30 is listed by the auction with a **SALVAGE CERTIFICATE** and **FRONT END** as the primary damage classification. The visible front-end damage supports the auction’s FRONT END code; however, the salvage certificate status cannot be confirmed from the available exterior and interior photographs. The front of the vehicle has severe collision damage. The hood has large creases, raised irregular edges, and a substantially uneven gap above the grille and headlights. The front bumper fascia and upper grille are cracked, displaced, and irregular, with several grille or trim sections missing or separated and internal areas exposed. The center grille emblem is also missing. The headlight and surrounding bumper/trim areas have uneven gaps and visible separation. The adjacent front fender edge is deformed, with an irregular contour and uneven panel gaps. A broad dent with visible creasing is present on the outer panel of the front side door. Inside the vehicle, the driver steering-wheel airbag and the lower-dash airbag beneath the steering column are visibly deployed. The restraint-system components, crash sensors, steering and dashboard areas, lighting, cooling system, front structure, suspension, and alignment should be professionally inspected before repair or purchase. The available findings do not establish the condition of these components or the vehicle’s drivability. VIN decoding identifies this vehicle as a Mexico-built 2023 Mazda CX-30 SUV with four-wheel drive, a 2.5-liter four-cylinder gasoline engine, and a six-speed automatic transmission. An official NHTSA recall is listed for this make, model, and year: recall **23V275000**, concerning possible damage to the anti-lock brake system hydraulic control unit, which may reduce braking ability. The remedy involves inspection and replacement of the ABS hydraulic control unit as necessary. Recall completion should be verified with Mazda or an authorized dealer before the vehicle is operated.