2025 MAZDA 3 Select Sport Package

The auction record lists the vehicle as “CERT OF TITLE SLVG REBUILDABLE” with “REAR END” as the primary damage classification. Stage 1 reports that the visible rear damage supports the stated rear-end classification, while also noting substantial front-end damage. The salvage/rebuildable title status cannot be confirmed from exterior photographs. The front end has severe damage across both corners and the full bumper area. Both the left and right headlamp assemblies are missing, leaving open cavities with components exposed. The front bumper cover is severely displaced, cracked, and deformed, with broken sections, open gaps, damage around the grille opening, and a damaged lower edge. The hood has multiple dents, including a large central-front dent, along with an uneven front edge and irregular gaps above the bumper. The grille surround and adjacent trim are also damaged, with broken edges and missing outer sections. The rear of the vehicle has significant collision damage. The rear windshield is missing, leaving the opening exposed. The left rear quarter panel and adjacent trunk-side bodywork show severe crumpling, creasing, and distortion. The left outer rear lamp lens or assembly is missing, exposing internal components. The rear bumper has extensive scuffing and moderate deformation, particularly at the center and left corner, with an uneven transition to the damaged quarter panel. An irregular gap is visible between the trunk area, rear lamp area, and quarter panel. The left rear door also has minor localized surface deformation near its rear and lower sections. According to the VIN decode, this is a 2025 Mazda3 sedan manufactured in Japan, equipped with a 2.5-liter four-cylinder gasoline engine, six-speed automatic transmission, and 4x2 drivetrain. The decoded equipment includes LED low-beam headlamps, curtain and side airbags for the first and second rows, front and knee airbags, adaptive cruise control, blind-spot monitoring, lane-departure warning, lane-keep assistance, forward-collision warning, rear cross-traffic alert, and a rear visibility system. The visible damage is extensive at both the front and rear and includes missing safety-related lighting and glazing components. A complete physical inspection is required to assess possible damage to structural areas, mounting points, wiring, sensors, airbags, restraint systems, mechanical components, and the vehicle’s overall roadworthiness.