2020 LEXUS NX 300 Comfort

The auction record lists the vehicle as “CERT OF SALVAGE > 75% DAMAGE,” with “FRONT END” as the primary damage code. The available findings support the FRONT END classification, showing extensive visible front-end damage. They also document severe rear-end damage and deployed airbags. However, the stated greater-than-75-percent damage level cannot be confirmed from exterior and interior photos alone. The front end is severely damaged. The hood is extensively creased and deformed across the front and center, with chipped paint and exposed light-colored material along the leading edge. The grille is broken and displaced, while the bumper assembly and lower fascia are crushed, fragmented, and missing sections. The radiator area, horns, brackets, wiring, and other internal components are exposed. The front lamp surrounds have broken or displaced trim and large gaps around the lamp assemblies. The left front fender and wheel-arch area are also severely deformed, with missing outer trim and exposed mounting points. The rear of the vehicle has substantial collision damage as well. The liftgate and surrounding opening are deeply crushed and deformed, with torn and displaced metal, particularly on the right side. The rear window is missing, with glass fragments visible along the lower edge. The right rear lamp is broken with its internal components and wiring exposed, and the surrounding right rear quarter and hatch-side panel have pronounced creasing, torn edges, and displaced sheet metal. A lower right rear bumper component is detached and hanging. The left rear quarter and hatch surround are also extensively creased, with displaced panels, exposed mounting points, and missing trim; the left rear lamp assembly is absent, leaving its cavity and wiring exposed. Multiple restraint-system components are visibly deployed, including the steering-wheel and passenger-dashboard airbags, front seat side airbags, and curtain airbags hanging along the roof and side-window areas. The vehicle should undergo a complete structural, mechanical, electrical, lighting, restraint-system, and water-intrusion inspection before any repair or purchase decision. The VIN identifies this vehicle as a 2020 Lexus NX SUV with all-wheel drive, a 2.0-liter four-cylinder gasoline engine, and a six-speed automatic transmission. The decoded engine is model 8AR-FTS, and the vehicle was manufactured by Toyota Motor Corporation at the Tahara Plant in Japan.