2019 LEXUS ES 300h

The 2019 Lexus ES is listed with a salvage certificate and a “REAR END” primary-damage designation in the auction records. The visible rear-end collision damage supports the stated primary-damage code; however, the salvage-certificate title status cannot be confirmed from exterior photographs alone. The rear of the vehicle has severe damage concentrated on the left side. The trunk lid is heavily creased and deformed across its lower section and rear corner, with a wide, irregular gap above the rear bumper. The adjacent rear quarter panel is buckled and distorted around the rear lamp area. The left rear lamp assembly has broken lens material, displaced sections, and an open gap between the lamp and the surrounding body panels. The rear bumper cover is severely crushed and torn at the corner, with deep creasing, split material, displaced sections, and exposed components behind the cover. Additional light-colored scuffing and transferred material are visible across the bumper. The provided findings do not establish the condition of the underlying structure, sensors, lighting system, trunk mechanism, or other mechanical and electrical components. These areas should be inspected and tested during the repair assessment. VIN decoding identifies this vehicle as a Japan-built 2019 Lexus ES 300h sedan with a 2.5-liter four-cylinder gasoline-electric hybrid powertrain, automatic transmission, and front-wheel drive/4x2 configuration. An official NHTSA recall is recorded for the driver knee air-bag assembly under campaign 19V288000. The assembly may have been improperly installed, potentially affecting deployment in a crash. Toyota’s stated remedy is inspection and replacement if necessary; the completion status for this vehicle is not provided.