2025 HYUNDAI VENUE SE

The auction record lists the vehicle as a 2025 Hyundai Venue with a salvage title and identifies the primary damage as “SIDE.” Stage 1 reports that the visible evidence supports the SIDE classification because substantial damage is visible on the left side. However, Stage 1 also notes that the salvage-title status cannot be confirmed from the photographs. The most significant damage is concentrated along the left side. The left rear door has severe denting and creasing across the outer panel, including deep deformation along the lower and rear sections. The left front door has a large dent and crease near its rear edge and lower-middle area. The left rear quarter panel is also deformed around the wheel arch and behind the rear door. Sections of the black left rear wheel-arch trim are broken or missing, exposing red body metal and irregular edges. The lower rocker-panel molding beneath the left-side doors is displaced or damaged near the rear door and rear wheel area. Additional collision damage is visible at the front. The left-front edge of the hood is creased and deformed, creating an uneven gap above the left-front lighting and grille area. The left-front lower lamp housing has a damaged or missing outer lens, exposing dark internal components through an irregular opening. The left side of the front grille and adjacent trim also have broken or missing sections. According to the VIN decode, this is a 2025 Hyundai Venue SE, classified as a passenger-car wagon, with a gasoline 1.6-liter MPI Gamma II engine. It was manufactured by Hyundai Motor Company in South Korea. The decoded equipment includes standard ABS, electronic stability control, traction control, front and side-impact safety systems, curtain airbags for the first and second rows, lane-departure warning, lane-keep assistance, forward-collision warning, pedestrian automatic emergency braking, blind-spot monitoring, rear cross-traffic alert, and a rear-visibility system. The operation and condition of these systems are not established by the supplied findings. A physical inspection is recommended to assess the door, quarter-panel, rocker-area, hood, grille, lamp, trim, and any affected mounting or alignment points, as well as to verify the operation of the vehicle’s safety and lighting systems before purchase.