2025 HYUNDAI TUCSON SEL Convenience

The auction record lists the vehicle as having a salvage title and identifies FRONT END as the primary damage. Stage 1 reports that the visible front-end collision damage supports the stated FRONT END classification; however, the salvage-title status cannot be confirmed from exterior and interior photographs. The 2025 Hyundai Tucson has moderate to severe collision damage concentrated at the front. The hood has a pronounced longitudinal crease, localized buckling near its front edge, and an uneven gap above the grille. The front bumper and grille assembly contain multiple broken and displaced sections, open gaps, and separated trim. The vehicle-left front bumper corner is torn and separated, with exposed inner areas. Additional displacement and dark abrasion marks are visible on the grille and lower front fascia. The driver’s steering-wheel airbag is visibly deployed. The VIN decodes as a 2025 Hyundai Tucson SEL Convenience SUV with front-wheel drive (4x2), a 2.5-liter gasoline GDI Theta III engine, and standard safety equipment including front, side, and curtain airbags, forward collision warning, lane-keeping and lane-departure systems, blind-spot monitoring, adaptive cruise control, and automatic emergency braking. The vehicle was manufactured by Hyundai Motor Manufacturing Alabama in the United States. NHTSA records list recalls 24V691000 for a potentially missing glove-box airbag warning label and 24V877000 for improperly routed console wiring that could allow the transmission to shift out of Park without the brake applied. Additional listed campaigns include 25V549000 concerning improperly tightened connecting-rod bolts, 25V809000 concerning side-curtain airbag installation, 26V316000 concerning unexpected activation of the forward collision-avoidance system, and 26V400000 concerning possible instrument-cluster display failure. Recall completion and applicability should be verified by VIN with Hyundai or NHTSA before purchase. The vehicle should also undergo a comprehensive inspection for structural, restraint-system, cooling-system, lighting, electrical, and mechanical damage before repair or operation.