2017 HYUNDAI TUCSON SE (no options)

The auction record lists the vehicle as having a salvage title, with HAIL recorded as the primary damage. Stage 1 reports that the salvage-title status cannot be confirmed from exterior photographs. Stage 1 also reports that the photographs do not support the HAIL classification: the visible hood and roof surfaces are largely smooth without a dense pattern of small shallow dents, while the rear liftgate and bumper show broad creased and broken-panel damage that is inconsistent with a typical hail pattern. The vehicle has moderate damage to both front corners. The left front bumper corner has multiple scrapes, paint transfer, cracking, and irregular edges beneath and beside the headlamp, with additional abrasion on the adjacent fender. The right front bumper corner has extensive white scraping, chipped areas, an irregular gap near the headlamp, and scraped paint on the adjoining fender. The left side of the front bumper cover also has deep scrapes and damaged edges around the opening below the headlamp. The headlamp lens is visibly present in the reported area. The rear damage is more severe. The liftgate has broad inward deformation and pronounced creases across the lower and central sections. The license-plate mounting area is buckled, with a sharp vertical split or crease in the lower central panel. The rear bumper cover has large splits and cracked sections along the lower left and central areas, is displaced from its normal position, and hangs below the surrounding bumper line. Additional damage is visible around the lower liftgate and rear bumper, including a broken-looking opening on the lower left side. The VIN decodes as a 2017 Hyundai Tucson SUV with front-wheel drive (4x2), a 2.0-liter four-cylinder gasoline engine, and a six-speed automatic transmission. The vehicle was manufactured by Hyundai Motor Co. in South Korea and is identified as an SE trim with no listed options in the supplied decode data. Three NHTSA recalls are listed for this model year. Recall 16V842000 concerns an accessory trailer-hitch wiring harness that may cause trailer brake lights to remain illuminated. Recall 21V727000 concerns premature connecting-rod-bearing wear, which may lead to engine damage, fire, or an engine stall; the remedy includes engine inspection, possible replacement, and installation of a Knock Sensor Detection System software update. Recall 20V543000 concerns possible corrosion and electrical shorting in the anti-lock brake hydraulic electronic control unit, which may result in an engine-compartment fire; the remedy includes replacement of the HECU fuse. Completion of these recall repairs should be confirmed by VIN-specific records before purchase. A physical inspection is recommended to assess structural alignment, bumper and liftgate mounting points, headlamp and sensor functionality, possible concealed damage, and the operating condition of the engine, braking system, and other safety-related components.