2023 HYUNDAI TUCSON

The auction record lists the vehicle as having a “CERT OF TITLE SLVG REBUILDABLE” status with “REAR END” as the primary damage. Stage 1 reports that the visible evidence supports the rear-end damage classification, citing severe deformation of the rear liftgate and bumper area and missing rear bumper components. Stage 1 also states that the salvage/rebuildable title status cannot be confirmed from exterior photographs. The rear bumper cover is missing, exposing the lower rear body, bumper mounting areas, wiring, and exhaust components. Both rear bumper corners have irregular, deformed edges with exposed mounting hardware. Detached blue and black bumper panels and trim pieces are shown on the ground behind the vehicle. The rear liftgate outer panel has extensive creasing, buckling, and deformation across the center and lower sections, including the license-plate recess. These findings indicate substantial rear collision damage and suggest that the rear bumper assembly and liftgate will require significant repair or replacement. The condition of the underlying body structure, exhaust system, wiring, sensors, and other mechanical components requires physical inspection. Inside the vehicle, the driver’s seat lower outer bolster has a large tear, with the light-colored underlying material visible. The VIN decodes as a 2023 Hyundai Tucson SUV with front-wheel drive (4x2), a 2.5-liter four-cylinder gasoline engine, an automatic transmission, and the SEL trim with Convenience Package. The vehicle was manufactured by Hyundai Motor Manufacturing Alabama in the United States. Two NHTSA recalls are listed for this model year. Campaign 23V526000 concerns the Idle Stop & Go electric oil-pump controller, which may overheat and increase the risk of fire; the remedy is inspection and replacement of the controller as necessary. Campaign 25V893000 concerns an optional Mobis trailer-hitch wiring harness that may allow water intrusion, potentially causing trailer-light failure or an electrical short; the listed remedy is removal of the harness and installation of a dust cap. Recall completion should be verified with Hyundai or through an authorized dealer before operation.