2019 HYUNDAI SONATA Eco Turbo, SE

This 2019 Hyundai Sonata is identified by VIN decoding as a sedan equipped with a 2.4-liter four-cylinder gasoline engine. It was manufactured by Hyundai Motor Manufacturing in Montgomery, Alabama. The auction lists the vehicle as **Non-Repairable** with **Front End** as the primary damage classification. Stage 1 reports that the visible evidence supports the Front End classification, citing severe damage to the hood, front bumper, grille and fascia, front-right headlamp, and front-right fender. Stage 1 also states that the Non-Repairable condition designation cannot be confirmed from the photographs alone. The front end has extensive collision damage. The hood is deeply creased and raised across the front and right side, with substantial paint loss. The front bumper cover is cracked, partially detached, and missing sections, exposing components behind it. The grille and upper fascia are broken or missing, while the front-right headlamp has an open housing with internal components visible. The front-right fender is creased and torn around the headlamp and wheel arch, and the hood, fender, and headlamp no longer maintain normal panel gaps. The front-right wheel-well liner and adjacent lower plastic components are also displaced and hanging. The rear of the vehicle is damaged as well. The rear bumper cover has extensive cracking, tearing, separation, and displaced sections across the lower rear and both corners. The rear-right corner has a large missing or torn section, while the rear-left corner is pulled away from the body beneath the tail lamp, exposing internal trim and mounting areas. The lower-left bumper section is cracked and torn. The trunk lid has moderate deformation, with an uneven lower edge and an irregular gap above the bumper. The driver airbag is visibly deployed from the steering wheel. The supplied findings do not establish the condition of the other restraint-system components, structural members, mechanical systems, electrical systems, or the vehicle’s ability to operate. A comprehensive physical inspection and evaluation of the airbag and restraint systems, front and rear body structure, lighting, cooling components, suspension, steering, and drivetrain would be required before repair or purchase decisions are made.