2019 HYUNDAI SANTA FE SE

The auction record lists the vehicle as having a “CERTIFICATE OF TITLE” condition and identifies “REAR END” as the primary damage. Based on Stage 1’s photo review, the visible missing and broken rear bumper components support the unverified rear-end damage classification. The certificate-of-title status cannot be confirmed from the available photos. The rear bumper assembly is severely damaged across the vehicle. The bumper covers and corner trim are missing on both the right and left sides, while wiring, mounting brackets, internal bumper structures, and portions of the exhaust are exposed. Lower black bumper and valance components are broken, hanging, or displaced, with a detached piece visible beneath the rear of the vehicle. Replacement of the rear bumper components and inspection of the underlying structure, wiring, and exhaust system will be required. The hood has multiple large areas of peeling or missing exterior paint, exposing gray and beige-colored underlying layers. A minor dark scuff or paint mark is visible on the lower-middle portion of the right rear door. Inside, the outer front edge of the driver’s seat cushion has a large upholstery tear with yellow foam exposed. The VIN identifies this vehicle as a 2019 Hyundai Santa Fe SE, a front-wheel-drive (4x2) SUV equipped with a 2.4-liter four-cylinder gasoline engine. It was manufactured by Hyundai Motor Manufacturing Alabama in the United States. Two NHTSA safety recalls are listed for this model and year. Recall 18V715000 concerns side-curtain air-bag mounting bolts that may damage the airbags during deployment; the remedy is installation of protective covers. Recall 23V181000 concerns a possible electrical short and fire risk involving certain tow-hitch harness modules; the remedy involves a fuse and wire-extension kit as necessary. Recall completion should be verified with Hyundai or an authorized dealer using the vehicle’s VIN.