2025 HYUNDAI SANTA CRUZ SE

This 2025 Hyundai Santa Cruz has a SALVAGE CERTIFICATE, with the auction listing FRONT END as its primary damage classification. The visible extensive front-end collision damage supports the unverified “FRONT END” code; however, the salvage-title status cannot be confirmed from the photos. The front end has severe damage across the hood, front bumper, grille, fascia, and left front corner. The hood is extensively crushed and sharply folded. The left front fender and headlamp assembly are missing, while multiple surrounding components are broken, displaced, or absent, leaving wiring and internal parts exposed. The radiator and condenser assembly is visibly crushed and deformed. The windshield has multiple cracks near the upper central area. Several airbags are deployed, including the driver airbag, the front passenger-side airbag, and the left-side roof and curtain airbags covering the front and rear passenger areas. Airbag-system replacement and a complete inspection of the restraint system will be required. The condition of the engine, cooling system, structural components, suspension, steering, electrical systems, and other concealed parts cannot be determined from these findings and should be checked before purchase. The VIN decodes as a 2025 Hyundai Santa Cruz SE pickup with a 2.5-liter gasoline GDI THETA III engine, 4x2 drive, and manufacture in Montgomery, Alabama, by Hyundai Motor Manufacturing Alabama LLC. Three NHTSA recalls are listed for this model and year: recall 24V877000 concerns console-extension wiring that may allow the transmission to shift out of Park without the brake applied; recall 25V809000 concerns improperly installed side-curtain airbags that may not deploy as intended; and recall 26V316000 concerns front-camera software that may cause premature and unexpected automatic braking. Dealer remedies are listed as free of charge, subject to recall applicability and completion status for this VIN. Recall repairs should be verified before the vehicle is operated.