2025 HYUNDAI ELANTRA SE

The vehicle is listed by the auction with a **SALVAGE VEHICLE TITLE** and **REAR END** as the primary damage classification. Stage 1 reports that the visible evidence supports the REAR END classification through extensive rear bumper, left rear quarter-panel, trunk-area, and airbag damage. However, salvage-title status cannot be confirmed from photographs alone. The rear bumper cover is missing, exposing the bumper reinforcement, mounting brackets, wiring, and inner rear body area. A large black bumper cover and several smaller bumper and trim pieces are detached and lying on the ground. The left rear quarter panel and wheel-arch area are severely crushed and creased, with an open and irregular rear corner exposing inner panels and mounting components. The lower trunk-lid area and adjacent rear body panel have visible dents and creasing. The lower edge of the left rear door and the adjacent rocker panel show scraping, creasing, and an irregular lower body contour. The roof curtain airbags are deployed, with white airbag fabric hanging from the roof/headliner area along the side of the passenger compartment. The front passenger seat side airbag is also deployed, with the airbag fabric protruding through the outer seat bolster. According to the VIN decode, this is a 2025 Hyundai Elantra SE sedan manufactured by Hyundai Motor Co. in Ulsan, South Korea. It is equipped with a 2.0-liter gasoline MPI NU PE engine. The decoded safety equipment includes front and side airbags, curtain airbags for the first and second rows, electronic stability control, traction control, forward-collision warning, lane-departure warning, blind-spot monitoring, rear cross-traffic alert, and rear automatic emergency braking. The condition of these systems and any related sensors or control modules requires inspection following the collision and airbag deployment.