2025 HYUNDAI ELANTRA SE

The auction record identifies the vehicle as having a salvage title and lists FRONT END as the primary damage. Stage 1 reports that the visible front-end damage supports the stated FRONT END claim, while noting that the salvage-title status cannot be confirmed from exterior photographs alone. The front hood has a pronounced crease and localized deformation along its leading edge, with cracked or broken paint above the headlamp and near the center emblem. The front bumper fascia and adjacent black grille trim are broken and displaced, creating an irregular opening with red material visible behind the grille. A red painted front edge panel beneath the open hood also has a split and irregular cracking across its center section. The driver airbag is visibly deployed from the steering wheel, indicating that the restraint system will require inspection and likely repair or replacement. The provided findings do not establish the condition of other airbags, structural components, mechanical systems, cooling systems, or the vehicle’s ability to run and drive. According to the VIN decode, this is a 2025 Hyundai Elantra SE sedan manufactured by Hyundai Motor Co. in Ulsan, South Korea. It is equipped with a 2.0-liter gasoline MPI NU PE engine and front-row driver and passenger airbags, along with curtain and side airbags for the first and second rows. The decode also lists standard safety features including ABS, electronic stability control, forward collision warning, lane departure warning, lane keep assistance, blind-spot monitoring, rear cross-traffic alert, and pedestrian automatic emergency braking. A comprehensive physical inspection and diagnostic scan are recommended before purchase, with particular attention to the front structure, restraint systems, wiring, cooling components, and driver-assistance sensors.