2020 HYUNDAI ELANTRA SE

The vehicle is listed with a **CERT OF TITLE–SALVAGE** condition and an auction primary-damage classification of **ALL OVER**. These are auction designations and should be verified through the title and vehicle history records. Stage 1 reports that the visible evidence does not support an all-over or rollover damage description: substantial collision damage is visible at the front and left-side/rear-left areas, while the roof, glazing, and most of the right side appear largely intact. A salvage title cannot be confirmed from exterior photographs. Significant collision damage is present at the front. The front bumper cover and grille are missing, exposing the bumper reinforcement and cooling components. Lower front trim and under-bumper pieces are detached and hanging below the exposed structure. The right front bumper and lower fascia are also missing, with internal components exposed, and the lower edge of the right front fender is bent and displaced. Several light linear scuff marks are visible on the hood. The left side and rear-left area have extensive damage. The left front door is deeply creased and severely deformed, while the left rear door has broad deformation, pronounced creases, and disturbed panel gaps. The left front fender is creased above and behind the front wheel. The left rear quarter panel is deeply crushed around the fuel-filler area and rear wheel arch. The left rear tail lamp is broken, with portions of the housing missing and internal components exposed. The adjacent left rear bumper corner is deformed, scuffed, and irregularly damaged. The vehicle decodes as a 2020 Hyundai Elantra SE sedan with front-wheel drive, a 2.0-liter four-cylinder gasoline engine, and a continuously variable transmission. The VIN data identifies the vehicle as manufactured by Hyundai in South Korea. Three NHTSA safety recalls are associated with this make, model, and year. Recall 21V301000 concerns potentially defective piston oil rings in vehicles equipped with the 2.0-liter Nu MPI engine, which may cause engine damage, stalling, or an oil-related fire risk; the remedy includes inspection, possible engine replacement, and related software deployment. Recall 19V720000 concerns insufficiently tightened right-rear wheel lug nuts that could allow the wheel to detach. Recall 19V721000 concerns insufficiently tightened front lower-control-arm ball-joint fasteners that could allow the ball joint to detach and cause loss of control. Recall completion should be verified by VIN with Hyundai or an authorized dealer. The visible damage indicates a substantial repair project, including replacement or repair of exterior panels, front-end components, lighting, bumper assemblies, and associated mounting or structural parts. Mechanical, suspension, cooling-system, restraint-system, alignment, and possible hidden structural damage should be professionally inspected before purchase.