2020 HYUNDAI ELANTRA

The auction record identifies this 2020 Hyundai Elantra as having a salvage certificate, with “front end” listed as the primary damage. The Stage 1 assessment reports that the visible evidence supports the front-end damage classification, citing the missing bumper and grille components, exposed front-end parts, and deformation at the front corner. The salvage-certificate status itself cannot be confirmed from photographs. The front bumper cover is missing from the vehicle, leaving the lower front components and inner front structure exposed. The center grille, lower grille, surrounding bumper trim, and other front-fascia components are also absent, exposing the radiator, condenser area, reinforcement, and lower internal components. A detached bumper cover is shown separately; its mounting edges are irregular and damaged, with displaced side sections. The front wheel-well liner and surrounding trim are missing behind the front wheel, exposing internal components. Lower plastic panels and underbody trim are loose or detached, with portions extending below the front opening. The front fender is creased and deformed around the headlamp and upper wheel-arch area. The front edge of the hood is raised and uneven, with an irregular gap at the corner next to the headlamp. The VIN decodes this vehicle as a 2020 Hyundai Elantra sedan with front-wheel drive, a 2.0-liter four-cylinder gasoline engine, and a continuously variable transmission. The vehicle was manufactured in the United States. Three NHTSA safety recalls are listed for this make, model, and year. Recall 21V301000 concerns potentially improperly heat-treated piston oil rings on vehicles with the 2.0-liter Nu MPI engine, which may cause engine damage, stalling, or an oil-related fire risk. Recall 19V720000 concerns insufficiently tightened right-rear wheel lug nuts, which could allow the wheel to detach. Recall 19V721000 concerns insufficiently tightened lower control-arm ball-joint fasteners, which could allow the ball joint to detach and cause loss of control. The completion status of these recalls should be verified with Hyundai or an authorized dealer. Repairs should include replacement and proper installation of the front bumper, grille, wheel-well liner, and missing trim, along with inspection of the radiator and condenser area, reinforcement, lower front structure, hood and fender mounting points, underbody panels, lighting, wiring, steering and suspension components, and vehicle safety systems. A complete mechanical, structural, and pre-repair diagnostic inspection is recommended before purchase or road use.