2016 DODGE DURANGO R/T

The auction record lists a salvage/rebuildable title and identifies the primary damage as FRONT END. The visible hood and front bumper damage supports the FRONT END classification. The salvage/rebuildable title status cannot be confirmed from exterior photos alone. The hood has moderate deformation at the left-front corner and leading edge. The hood-to-grille and hood-to-headlamp gaps are uneven, with a raised, irregular contour and chipped paint near the left headlamp and fender junction. The front-left bumper corner has a clearly visible open hole with an irregular edge and a black component protruding through it, indicating missing bumper material or trim. Light abrasion and scuffing are also present on the lower front bumper and fascia. Additional cosmetic scuffing is visible along the lower sections of the left-side doors and rocker-panel area. The lower left section of the rear bumper has several light-colored horizontal abrasion marks. The VIN decodes this vehicle as a 2016 Dodge Durango R/T SUV with rear-wheel drive (4x2), a 5.7-liter gasoline V8 engine rated at 360 horsepower, manufactured by FCA US LLC at the Jefferson North Assembly plant in the United States. NHTSA records list recall campaign 18V332000 for certain 2014–2018 Dodge Durango vehicles, concerning a wiring defect that could prevent cruise control from disengaging. The listed remedy is a software update, and owners were advised not to use cruise control until the repair was completed. Campaign 16V168000 concerns a potentially cracking left-front brake caliper on certain 2015–2016 Durango vehicles built within a specified production period. Campaign 16V814000 concerns a fuel-rail crossover tube on certain 2016 Durango vehicles with the 3.6-liter engine; this VIN decodes with a 5.7-liter engine. Recall applicability and completion should be verified by VIN with an authorized Dodge dealer.