2025 DODGE DURANGO GT

The vehicle is listed with an auction condition designation of “CERT OF SALVAGE > 75% DAMAGE” and a primary damage classification of “SIDE.” Stage 1 reports that the visible evidence supports the SIDE classification, with substantial dents and creasing on the side doors. However, the photographs do not support or permit confirmation of the “CERT OF SALVAGE > 75% DAMAGE” claim. The visible left-side front and rear doors have broad, irregular dents, extensive rippling, and pronounced horizontal creases across their lower and middle sections. The damage is assessed as moderate and will likely require significant panel repair or replacement, subject to physical inspection. A white fabric section is hanging from the left roof rail and upper door opening, consistent with a deployed side-curtain airbag. This is assessed as severe damage and indicates that the restraint system requires inspection and likely repair or replacement. The instrument cluster shows illuminated ABS, airbag, traction-control, brake, and general vehicle warning indicators. These images do not establish the cause of the warnings, and no specific mechanical or electrical failure diagnosis can be made without diagnostic testing. According to the VIN decode, this is a 2025 Dodge Durango GT SUV with all-wheel drive, a 3.6-liter gasoline V6 rated at 295 horsepower, and a four-door configuration. It was manufactured by FCA US LLC at the Jefferson North Assembly plant in Detroit, Michigan. Factory data lists ABS, electronic stability control, traction control, side airbags for all rows, and front airbags as standard equipment. A complete inspection should include the body structure, door and roof areas, airbag and seat-belt systems, braking and ABS components, wiring, and all stored diagnostic codes before purchase.