2022 DODGE CHARGER SXT RWD

The auction record identifies this 2022 Dodge Charger as having a salvage certificate of title, with “SIDE” listed as the primary damage classification. The visible evidence supports the SIDE classification: substantial damage is present along the left side, particularly around the doors and rocker panel. However, salvage-title status cannot be confirmed from photographs. The left front and left rear door outer panels are severely crushed, deeply creased, torn, and displaced, including damage to their lower sections. The left rocker panel below the doors also has severe folds, crushed areas, and torn lower edges. The left front fender is moderately deformed around the wheel opening, with the wheel-arch liner area exposed. At the front, the left bumper corner is moderately damaged, with the cover torn and separated from the surrounding bodywork. A large black underbody or wheel-well plastic panel is detached and lying on the ground in front of the vehicle. The passenger-side roofline airbag and additional airbag fabric beside the front passenger seat are visibly deployed. This indicates that the restraint system will require comprehensive inspection and likely replacement of deployed components, along with checks for related structural and electronic damage. The photographs do not establish the condition of the engine, transmission, suspension, steering, frame, or other mechanical systems. Factory information identifies the vehicle as a 2022 Dodge Charger SXT sedan with a 3.6-liter gasoline six-cylinder engine, rear-wheel drive, and an eight-speed automatic transmission. It was manufactured by FCA Canada Inc. at the Brampton Assembly plant in Canada. Official NHTSA recall information lists two TPMS recalls, campaigns 22V504000 and 22V808000, concerning sensor batteries that may fail prematurely and prevent low-tire-pressure warnings. Campaign 22V808000 is an expansion of 22V504000. Recall 22V866000 concerns a shifter assembly that may not properly engage Drive and calls for replacement of the assembly. Recall completion should be verified with an authorized Dodge dealer using the VIN. A thorough in-person inspection is recommended before purchase, with particular attention to the left-side structure, rocker area, airbag and restraint systems, wheel-well components, underbody, alignment, and hidden mechanical or electrical damage.