2017 DODGE CHARGER R/T 392

This 2017 Dodge Charger is listed with a salvage certificate and an auction primary-damage classification of REAR END. Stage 1 reports that the visible missing rear bumper, exposed rear components, and deformed right rear quarter panel support the stated rear-end damage classification; however, the salvage-certificate status cannot be independently confirmed from the photos. The rear bumper cover is missing across the vehicle, leaving the bumper reinforcement and other underlying components exposed. The lower rear fascia/trim is also absent, with mounting openings and internal components visible. At the right rear corner, the bumper side section is missing, and the right rear quarter panel is severely creased and deformed around the wheel arch and bumper junction. Wiring and attached components are hanging below both the left and right rear corners. These areas will require thorough inspection and repair, including assessment of the bumper reinforcement, mounting points, wiring, rear body structure, lighting, sensors, and related components. The supplied findings do not establish the condition of the vehicle’s mechanical systems, alignment, or hidden structural damage. VIN decoding identifies the vehicle as a left-hand-drive, rear-wheel-drive sedan built by FCA Canada at the Brampton Assembly plant. It is equipped with a gasoline 6.4-liter V8 engine and is identified as the R/T 392 trim. Several NHTSA recalls are associated with 2017 Dodge Charger vehicles. Recall 18V332000 concerns a wiring defect that may prevent cruise control from disengaging; owners are advised not to use cruise control until the software remedy has been completed. Other listed recalls concern specific configurations, including all-wheel-drive Chargers, pursuit vehicles, and Hellcat-equipped vehicles. This vehicle is decoded as rear-wheel drive and R/T 392, so recall applicability should be confirmed by VIN with a Dodge dealer. Recall completion and any outstanding campaigns should be verified before purchase.