Lot 62454546 · GA - MACON

2015 DODGE CHALLENGER SXT

VIN 2C3CDZAT2FH895305

Current bid
$150
≈ €139

The vehicle

  • Year 2015
  • Make / model DODGE CHALLENGER
  • Trim level SXT
  • Body type Coupe
  • Condition CERTIFICATE OF TITLE
  • VIN 2C3CDZAT2FH895305
  • Drive type RWD/Rear-Wheel Drive
  • Steering location Left-Hand Drive (LHD)
  • Exterior color black
  • Odometer 102,980 mi (165,730 km)
  • Listing valid until 2026-08-06 17:00

Factory equipment

  • Drivetrain rear-wheel drive
  • Climate dual-zone climate control
  • Engine 5.7L HEMI V8
  • Factory colour PITCH BLACK CLEAR COAT
  • Interior cloth
  • locking differential
  • Comfort Access
  • reversing camera
Notes
Този Dodge Challenger SXT от 2015 г. е истинска американска класика с мощен 5.7-литров HEMI V8 двигател. Тежки щети по предницата. 🚗 Автомобилът е Dodge Challenger SXT от 2015 г. 📋 Основни характеристики: пробег: 165 730 км двигател: 5.7 L, 8 цилиндъра, 375 к.с. задвижване: задно предаване ℹ️ Спецификация: каросерия: купе цвят: черен фабричен цвят: PITCH BLACK CLEAR COAT ✅ Оборудване: 5.7L HEMI V8 двузонов климатроник задно задвижване заключващ се диференциал Comfort Access камера за задно виждане
Make an offer or ask a question

Log in to make an offer or ask a question about this car. Log in

Damage assessment

Body zones

AI-detected zones are pre-marked below — click a zone to adjust its severity.

Top
Underbody
Condition assessment 1 AI-written variant

gpt-5.6-luna

The auction record lists the vehicle condition as “Certificate of Title” and identifies “Front End” as the primary damage. Stage 1 reports that the visible evidence supports the front-end damage code because substantial damage and multiple missing components are visible. The certificate-of-title condition could not be verified from the photographs. The front bumper cover, grille, and both headlamp assemblies are missing. This leaves the radiator, condenser, wiring, brackets, mounting points, and other internal front-end components exposed. Loose wiring and disconnected-looking electrical leads are hanging in the lower front-end area. The leading edge of the hood is severely crushed and irregular, with pronounced creases and torn or sharply folded metal, particularly on the front-right side. Both front fenders are deformed around their front corners and wheel-arch edges, with torn and irregular material visible. The extent of the visible damage indicates that the vehicle requires substantial front-end repair and replacement parts. The exposed cooling, structural, mounting, and electrical components should be physically inspected for hidden damage, alignment issues, bent supports, wiring faults, and possible damage to the cooling system before repair or operation. The photographs do not establish the mechanical condition, roadworthiness, or whether the vehicle can be driven safely. According to the NHTSA VIN decode, this is a 2015 Dodge Challenger SXT coupe with rear-wheel drive, a 5.7-liter gasoline V8 engine, and left-hand drive. It was manufactured by FCA Canada Inc. at the Brampton Assembly plant in Canada. NHTSA records list several recalls associated with 2015 Dodge Challenger vehicles. These include campaigns concerning cruise-control disengagement caused by a powertrain-control-module or wiring issue, possible instrument-cluster failure, a radio software vulnerability, and, for certain production dates or equipment, side-curtain airbag mounting or fuel-system concerns. The available information does not confirm which campaigns apply specifically to this VIN or whether any recall repairs have been completed. Recall status should be verified with an authorised Dodge dealer before purchase.

Generated from auction photos by AI vision, then written up by an AI model. Findings are qualitative, not a certified inspection.