Lot 48678306 · NJ - GLASSBORO EAST
2020 DODGE CHALLENGER SXT
VIN 2C3CDZAG9LH215219
Price
Contact for pricing
Archive
The vehicle
- Year 2020
- Make / model DODGE CHALLENGER
- Trim level SXT
- Body type Sedan/Saloon
- Condition SALVAGE CERTIFICATE OF TITLE
- VIN 2C3CDZAG9LH215219
- Drive type RWD/Rear-Wheel Drive
- Transmission Automatic · 8-ст.
- Horsepower 305 к.с.
- Engine 3.6L V6 Pentastar ERB (DOHC 24v VVT)
- Steering location Left-Hand Drive (LHD)
- Exterior color black
- Odometer 12,471 mi (20,070 km)
- Listing valid until 2026-08-04 17:00
Factory equipment
- Drivetrain rear-wheel drive
- Climate dual-zone climate control
- Engine 3.6L Pentastar V6
- Wheels 20 inch, painted
- Factory colour PITCH BLACK CLEAR COAT
- Interior cloth
Engine sound
Engine start-up clip from the auction listing -- not an independent inspection.
Notes
Този Dodge Challenger SXT от 2020 г. е с пробег от едва 20 070 км и предлага мощен 3.6-литров V6 двигател с 305 конски сили.
Тежки щети по предницата от дясната страна.
Двигателят работи, но се чува леко почукване, което се усилва с оборотите и прави работата на празен ход леко неравномерна.
🚗 2020 Dodge Challenger SXT
📋 Основни характеристики:
пробег: 20 070 км
двигател: 3.6L, 6 цилиндъра, 305 к.с.
задвижване: задно предаване
ℹ️ Спецификация:
скоростна кутия: автоматична, 8-степенна
каросерия: седан
цвят: черен
джанти: 20 цола, боядисани
фабричен цвят: PITCH BLACK CLEAR COAT
✅ Оборудване:
3.6L Pentastar V6
двузонов климатроник
задно задвижване
следене на мъртва точка
Comfort Access
Apple CarPlay
Android Auto
камера за задно виждане
Make an offer or ask a question
Log in to make an offer or ask a question about this car. Log in
Damage assessment
Body zones
AI-detected zones are pre-marked below — click a zone to adjust its severity.
Top
Underbody
Condition assessment
The vehicle is listed with a salvage certificate of title and an auction primary-damage classification of FRONT END. Stage 1 reports that the visible evidence supports the stated front-end damage claim, with extensive damage to the hood, front bumper, headlamp area, fender, and front fascia. The salvage-certificate title status itself cannot be confirmed from photographs.
The 2020 Dodge Challenger has severe collision damage concentrated at the front passenger-side corner. The hood has large buckles and creases across the front and passenger-side sections, with the front edge raised and substantial gaps where it no longer sits flush with the surrounding body panels. The passenger-side front bumper cover is torn, displaced, and partially missing, with internal components exposed. The passenger-side headlamp assembly is absent, leaving an open cavity with mounting points and other internal components visible.
The front passenger-side fender is heavily creased and deformed around the headlamp opening and wheel arch. The passenger-side grille and lower fascia contain broken and displaced plastic parts, open gaps, and exposed internal components. The bumper corner also has extensive white paint transfer, abrasions, torn plastic edges, and surface breakage. The available findings do not assess hidden structural, mechanical, electrical, cooling-system, suspension, or safety-system damage; a comprehensive physical inspection is recommended before purchase.
According to the VIN decode, this is a 2020 Dodge Challenger SXT sedan/saloon built by FCA Canada at Brampton Assembly in Canada. It is equipped with a 3.6-liter gasoline V6, an eight-speed automatic transmission, and rear-wheel drive.
One NHTSA safety recall is listed for this make, model, and year: recall 21V516000 concerns the front windshield bonding. If the windshield is not properly bonded, it may separate during a crash and increase the risk of injury. The stated remedy is replacement of the front windshield urethane sealant by a dealer at no charge. Recall completion status for this vehicle should be verified by VIN with an authorized dealer.
Generated from auction photos by AI vision, then written up by an AI model. Findings are qualitative, not a certified inspection.