2019 DODGE CHALLENGER SXT

The auction record lists the vehicle as having a “CERT OF TITLE SLVG REBUILDABLE” condition and a primary damage code of “FRONT END.” Stage 1 reports that the visible extensive front-end damage supports the auction’s “FRONT END” code; however, the salvage/rebuildable title status cannot be confirmed from photographs. The front end has extensive collision damage. The front bumper cover, grille, central fascia, lower air dam, and both headlamp assemblies are missing, exposing the bumper reinforcement, cooling components, brackets, wiring, and other internal front-end parts. The front-left corner has damaged and displaced plastic mounting structures and open gaps. The hood is deformed along its leading edge and left-front area, with pronounced creasing and an uneven, raised gap above the exposed front-end components. The rear bumper cover is also missing across the vehicle width, exposing the rear reinforcement and lower body structure. The outer rear lamp housings and adjacent corner trim are missing on both sides, with wiring and mounting points exposed. The rear fascia trim around the lamp assemblies and license-plate area is absent, and the right rear corner has separated and damaged plastic mounting structures. A dent and crease are visible in the left rear quarter panel below and forward of the fuel door. Inside, the front passenger seat outer bolster shows cracking and worn upholstery. The center-console armrest covering is heavily cracked and deteriorated, with surface material missing over a broad area. According to the NHTSA VIN decode, this is a 2019 Dodge Challenger SXT, a left-hand-drive, rear-wheel-drive passenger car built by FCA Canada at the Brampton Assembly plant in Canada. It is specified with a 3.6-liter gasoline V6 engine rated at 305 hp. Three NHTSA safety recalls are listed for this model year: a rearview-camera software issue affecting vehicles with 8.4-inch or 12-inch radio displays (20V191000), an instrument-cluster warning illumination issue (19V203000), and an incompatible front wheel and brake package that may allow tire contact with the steering knuckle (19V758000). Recall completion should be verified by VIN with an authorized Dodge/Chrysler dealer before purchase or road use. The documented damage indicates that a comprehensive inspection and repair assessment will be required, including the exposed front and rear structures, lighting and wiring, cooling components, hood alignment, and bumper mounting areas.