2021 DODGE CHALLENGER R/T SCAT PACK

The vehicle is recorded as a 2021 Dodge Challenger with a salvage title designation and an auction primary-damage classification of FRONT END. Stage 1 reports that the visible evidence supports the unverified front-end damage claim because the front bumper, hood, grille, headlamps, front fenders, engine, and other front-compartment assemblies are absent. The salvage-title status cannot be confirmed from exterior photographs. The recorded damage is extensive and severe. The front bumper fascia, grille, headlamps, hood, both front fenders, engine, and other major engine-compartment assemblies are missing, leaving the front body structure, rails, wiring, hoses, brackets, and mounting components exposed. Both front wheel and tire assemblies are absent, with suspension and brake components exposed. Both front doors are missing, exposing the cabin and door-jamb areas. A visible rear wheel and tire assembly is also absent on each recorded side, leaving brake discs and calipers exposed. The trunk lid and both rear lamp assemblies are missing, and the fuel-filler door is absent with the filler opening and cap assembly exposed. The interior has also been substantially dismantled. Front and rear seating, lower trim, rear interior panels, portions of the center console and dashboard, the instrument-cluster surround, and central infotainment trim/display components are missing or displaced. Exposed floor areas, wiring, brackets, mounting hardware, and loose trim pieces are visible. The steering-wheel center cover/module is absent, exposing internal wiring and mounting components. According to the VIN decode, this is a left-hand-drive, rear-wheel-drive Challenger R/T Scat Pack with a 6.4-liter gasoline V8 engine rated at 485 hp, originally equipped with 20-inch wheels. The vehicle was manufactured by FCA Canada Inc. at the Brampton Assembly plant in Canada. The engine and major front-compartment assemblies are currently missing, so their presence, condition, identity, and operability cannot be verified from these findings. Two NHTSA recalls are listed for this make, model, and year: recall 21V664000 concerns insufficient illumination of instrument-cluster safety-system indicators and calls for instrument-cluster software reprogramming; recall 21V516000 concerns possible improper windshield bonding and calls for replacement of the windshield urethane sealant. The available information does not establish whether either recall repair has been completed. Given the extent of missing structural, mechanical, electrical, exterior, and interior components, this vehicle requires a comprehensive physical inspection and substantial parts replacement before its completeness, structural condition, safety-system status, and roadworthiness can be assessed.