2022 DODGE CHALLENGER R/T

The auction record lists the vehicle as having a salvage title and identifies FRONT END as the primary damage code. Stage 1 reports that the visible front-end damage supports the stated FRONT END code; however, the salvage-title status cannot be confirmed from exterior photographs. The damage is concentrated at the image-left front corner. The headlamp assembly is missing, leaving an open cavity with internal components exposed. The bumper cover has large openings, torn and cracked sections, scuffing, and an uneven edge. The adjacent front fender has pronounced creasing and folded metal around the wheel arch and lamp area. The hood is moderately creased at the front corner, with an uneven raised gap along its leading edge. Additional light-colored scrape marks and surface abrasions are visible across the front bumper and corner fascia. Based on the VIN decode, this is a 2022 Dodge Challenger R/T with rear-wheel drive, a 5.7-liter gasoline V8, and a reported output of 375 horsepower. It is listed as a two-door passenger car manufactured by FCA Canada at the Brampton Assembly plant in Canada. Two NHTSA recalls are listed for this vehicle’s model year, both concerning tire-pressure-monitoring-system sensor batteries that may fail prematurely. Inoperative sensors may prevent low-tire-pressure warnings or cause an existing warning light to mask a tire-pressure problem. Campaign 22V504000 identifies remedy inspection and replacement of the sensors as necessary, while campaign 22V808000 is an expansion of the earlier recall. The completion status of these remedies for this vehicle should be verified with an authorized Dodge dealer.