2019 DODGE CHALLENGER R/T

The vehicle is listed by the auction as “BILL OF SALE – PARTS ONLY,” with “REAR END” shown as the primary damage classification. Stage 1 reports that the visible damage is concentrated at the rear and supports the stated rear-end damage code. The photos do not independently confirm the bill-of-sale or parts-only status. The rear quarter panel adjacent to the wheel has a severe dent and sharp crease extending from the rear lamp area toward the wheel arch. The outer rear lamp assembly is missing, leaving the lamp cavity and internal components exposed. The rear bumper cover and corner are heavily scraped and cracked, with the corner separated from the vehicle and sections of material missing. Internal components and wiring are visible beneath the lower bumper corner. The lower rear diffuser or trim is displaced and broken, with a loose wire hanging below. According to the VIN decode, this is a 2019 Dodge Challenger R/T with rear-wheel drive, a 5.7-liter gasoline V8 engine, and left-hand drive. It was manufactured by FCA Canada Inc. at the Brampton Assembly plant in Canada. Three NHTSA safety recalls are listed for this 2019 Dodge Challenger: a rearview-camera software issue affecting vehicles with 8.4-inch or 12-inch radio displays (campaign 20V191000), an instrument-cluster warning illumination issue (19V203000), and an incompatible front wheel and brake package that could allow tire contact with the steering knuckle (19V758000). Recall completion status for this vehicle should be verified with an authorized Dodge dealer or through the manufacturer using the VIN.