2019 DODGE CHALLENGER F/T Scat Pack

The vehicle is a 2019 Dodge Challenger with a salvage title. The auction lists “FRAME DAMAGE” as the primary damage classification. Stage 1 reports that visible front-end collision damage supports the salvage-condition designation, but no direct deformation of the frame or other structural component is visible; therefore, the frame-damage claim cannot be confirmed from the available photos. A professional structural inspection is recommended. The front end has severe visible damage. The front bumper cover is missing, exposing the bumper assembly and cooling components. Multiple grille and lower air-dam sections are fractured, separated, or missing. The front edge of the hood is uneven and raised in places, with an irregular gap above the exposed fascia. Both front fender leading edges have separated and irregular red panel sections around the headlamp and bumper areas. The removed bumper cover also has a crack and fractured section along its upper edge. Additional cosmetic damage includes light scratches on a front fender near the wheel arch, scuffing across the upper surface of the rear spoiler, and white scuff marks on parts of the black lower rear bumper trim. Factory VIN data identifies this vehicle as a rear-wheel-drive Dodge Challenger with a 6.4-liter gasoline V8 engine, rated at 485 horsepower, built by FCA Canada at the Brampton Assembly plant in Canada. The decoded trim is listed as F/T Scat Pack. NHTSA records list three recalls for this model year: a rearview-camera software issue affecting certain vehicles with 8.4-inch or 12-inch displays, an instrument-cluster software issue that may prevent proper illumination of driver warnings, and an incompatible front wheel and brake package that could allow tire contact with the steering knuckle. Recall completion should be verified by VIN with a Dodge dealer or the relevant manufacturer service channel before purchase.