2020 AUDI SQ5 quattro Prestige

This 2020 Audi SQ5 is listed with a Certificate of Destruction title status and a FRONT END primary-damage classification. The visible severe front-end collision damage supports the stated FRONT END classification. The Certificate of Destruction status cannot be confirmed or contradicted from the available images. The front end has extensive damage. The hood is heavily creased, buckled, and deformed across the front and center sections. The front bumper and surrounding fascia are torn and broken, with several sections missing and internal components exposed. The central grille is absent, and the exposed radiator and condenser fins are crushed and deformed in multiple areas. Both front headlamp surrounds and adjacent corner trim are broken or missing, leaving open gaps and exposed mounting areas. The near-side front fender is severely creased and buckled above and behind the front wheel, with damage around the headlamp and hood edges. The opposite front corner also shows distorted bumper and body-panel sections, open gaps, and exposed components. Both the driver steering-wheel airbag and the front passenger dashboard airbag are visibly deployed. The available findings do not establish the condition of the engine, transmission, cooling system, suspension, steering, electrical systems, structural components, or other safety systems. A comprehensive physical inspection and diagnostic assessment would be required before determining the full extent and cost of repairs. According to the VIN decode, this is a 2020 Audi SQ5 SUV with all-wheel drive, a 3.0-liter six-cylinder gasoline engine, an automatic transmission, and the quattro Prestige trim. The vehicle was manufactured by Audi AG in Mexico. NHTSA records list four recalls applicable to the 2020 Audi SQ5: recalls 22V034000 and 21V295000 concerning rear-axle alignment and trailing-arm lock nuts; recall 21V947000 concerning possible liquid intrusion into the gateway control module; and recall 20V505000 concerning improperly welded front seat-frame or backrest-adjuster components. Recall completion should be verified with Audi or an authorized dealer using the vehicle identification number.