2024 AUDI S5 quattro Premium Plus

The vehicle is a 2024 Audi S5 Sportback quattro Premium Plus with a salvage vehicle title. The auction lists the primary damage as FRONT END. Stage 1 reports that the visible evidence supports this primary-damage code, citing extensive front-end damage and missing components; however, the salvage-title status cannot be verified from photographs alone. The front end has severe collision damage. The front bumper cover and grille are missing or detached, exposing the metal reinforcement, intercooler, cooling components, wiring, and mounting areas. One headlamp assembly is absent from its mounting position, with a detached assembly shown separately. The lower front trim is also separated or hanging, leaving the radiator and lower cooling components exposed. The hood has multiple large creases and deformed areas across its front section, including distortion at both front corners. The front fender edges and surrounding panels near the headlamp openings are visibly deformed, with open gaps and damaged panel edges. The grille is crushed and fractured on its right side, with broken mounting and adjacent plastic sections. Additional cosmetic damage includes light scuffs and scratches on the side doors and rear quarter panel, along with a small abrasion on the outer portion of the rear seat lower cushion. According to the VIN decode, this Audi is equipped with a 3.0-liter, six-cylinder gasoline 3.0 TFSI engine, an automatic transmission, and all-wheel drive. The decoded output identifies the vehicle as a Sportback hatchback/liftback produced by Audi AG in Germany. The vehicle is also listed with standard features including ABS, electronic stability control, forward-collision warning, lane-departure warning, lane-keep assistance, adaptive cruise control, rear cross-traffic alert, parking assistance, and LED low-beam headlamps. The visible damage appears concentrated at the front, but the condition of concealed structural, cooling, electrical, restraint, steering, suspension, and powertrain components cannot be determined from these findings. A comprehensive physical inspection and diagnostic scan are recommended before purchase.