2021 AUDI S4

The vehicle is listed with a salvage condition and an auction primary-damage designation of “undercarriage.” The undercarriage damage cannot be confirmed from the available photos and requires a physical inspection. The most evident damage is concentrated at both ends of the vehicle. The front bumper cover, grille surround, lower fascia, and lower grille components are missing, exposing the bumper reinforcement, cooling modules, mounting structures, brackets, and wiring. Multiple wires, harnesses, and connectors are hanging below the front of the vehicle. The front bumper cover itself has broken and torn mounting sections, including separated lower sections. The right-front bumper mounting area is also open, with exterior trim and bracket components missing. At the rear, the bumper cover and lower trim are missing across both corners. The rear reinforcement, internal supports, brackets, exhaust area, and wiring are exposed, with wires and connectors hanging from both sides. The left rocker-panel side skirt has a jagged broken section near the rear wheel opening. Light scuffing and paint transfer are visible on the lower left rear door and adjacent quarter-panel area. The left rear alloy wheel has scraped and abraded finish along the outer rim edge and lower lip. No other damage findings were provided. Factory data identifies this vehicle as a 2021 Audi S4 sedan with all-wheel drive, a 3.0-liter six-cylinder gasoline engine, and an eight-speed automatic transmission. The vehicle was manufactured by Audi AG in Germany. NHTSA records list four recalls applicable to the 2021 Audi S4 Sedan: rear-seat-belt automatic-locking retractor operation (21V606000), rear axle alignment inspection following an earlier repair (22V034000), rear-axle trailing-arm lock nuts (21V295000), and a rearview-camera display software issue (22V742000). Recall completion should be verified with Audi using the vehicle identification number before purchase. Because the front and rear bumper assemblies are substantially missing and related wiring and mounting areas are exposed, the vehicle requires a detailed inspection of the cooling modules, structural components, electrical systems, rear axle and suspension, wheel alignment, and all affected mounting points before repair or road use.