2014 AUDI S4 quattro Premium Plus

This 2014 Audi S4 is listed with a “CERT OF TITLE SLVG REBUILDABLE” auction condition and “FRONT END” as the primary damage classification. Stage 1 reports that the visible severe front-end damage supports the “FRONT END” classification; however, the salvage/rebuildable title status cannot be confirmed from exterior photographs. The front bumper cover is missing, exposing the radiator and other front-end components. A detached blue bumper assembly with grille is shown on the ground. Both headlamp areas are severely affected: the left headlamp is broken and partially missing, with internal components and wiring exposed, while the right headlamp assembly is absent. The hood is creased and deformed at the front-right area, with an uneven raised front edge. The front fenders are also damaged. The front-left fender is distorted around the missing headlamp, while the front-right fender and its leading edge are crushed and irregular around the headlamp opening and wheel arch. Black lower front panels are detached or hanging, and multiple brackets, plastic pieces, hoses, and wiring are exposed, displaced, or hanging below the hood and bumper area. The VIN decodes this vehicle as a 2014 Audi S4 sedan with quattro all-wheel drive, a 2.995-liter six-cylinder gasoline engine, and the Premium Plus trim. It was manufactured by Audi AG in Germany. NHTSA recall 14V667000 applies to certain 2013–2015 Audi S4 vehicles, including vehicles manufactured within the specified production period. The recall concerns an air-bag control-module algorithm that may fail to command front-air-bag deployment after a secondary front impact following side-air-bag deployment. Audi’s stated remedy was a software update to the air-bag control unit at no charge. Recall completion should be verified by VIN with Audi or an authorized dealer. The documented findings indicate substantial front-end collision damage. A complete inspection is recommended to assess the radiator and other exposed components, wiring, mounting points, structural areas, safety systems, and mechanical condition before purchase or repair.