2020 AUDI S4 quattro Premium Plus

The vehicle is listed with a Certificate of Salvage, and the auction’s primary damage classification is “BURN - ENGINE.” The certificate status cannot be verified from the photos. Stage 1 reports that the specific engine-burn claim requires a physical inspection and is neither confirmed nor contradicted by the available images. The 2020 Audi S4 shows severe destruction across the rear, side, roof, front corner, and passenger compartment. The rear body and trunk structure are extensively crushed, folded, torn open, and displaced. Large sections, including rear bumper and trunk-area components, are missing, leaving wiring, internal panels, and damaged structural sheet metal exposed. The visible side doors, quarter panels, roof edge, roof rail, and door-frame areas are severely deformed. Door openings are exposed, while glazing, exterior trim, handles, lighting, and other body components are missing or destroyed. The roof has extensive creasing, buckling, and surface loss, and the surrounding pillars and passenger-compartment openings are visibly distorted. Large areas of the body, interior, and engine-bay surroundings appear blackened, charred, or heavily discolored. Interior trim and components are absent or visibly damaged, with loose wiring exposed. The condition of the engine and other mechanical systems cannot be determined from the images. According to the VIN decode, this is a German-built 2020 Audi S4 sedan with a 3.0-liter six-cylinder gasoline engine, automatic transmission, and all-wheel drive. The decoded trim is quattro Premium Plus. NHTSA records list three recalls applicable to the 2020 Audi S4: rear axle trailing-arm lock-nut failure, a related rear-axle alignment inspection issue, and a seat-heater/passenger-occupant-detection-system cable fault that may disable the passenger airbag. Recall repairs should be confirmed through Audi or an authorized dealer before considering the vehicle roadworthy. Given the extent of the visible structural, body, interior, and possible heat-related damage, a comprehensive inspection and repair assessment would be required.