2019 AUDI Q7

The auction records the vehicle as having a salvage title and lists “SIDE” as the primary damage classification. Stage 1 reports that the visible denting, deformation, scraping, and missing trim on the left side support the SIDE damage claim; however, the salvage-title status cannot be confirmed from the photos. The main visible damage is concentrated on the left-side doors. The left front door has moderate denting and creasing along the lower section near the rear edge, with multiple light-colored scrape marks. The left rear door has a prominent irregular dent and creased deformation extending through the lower and middle sections, along with dark scraping near the lower rear area. Lower exterior trim or cladding is missing from both left-side doors, leaving mounting holes and bare lower door surfaces exposed. Additional paint scuffing and dark abrasion marks are visible along the lower portions of both doors and around the door gap. The available findings do not provide information about hidden structural damage, door operation, hinges, locks, window mechanisms, airbags, suspension, drivetrain, or other mechanical systems. A physical inspection is recommended, including checks of the door frames and surrounding pillars, interior components, wiring, safety systems, wheel alignment, and the underside. VIN decoding identifies this vehicle as a 2019 Audi Q7 SUV/MPV built in Bratislava, Slovakia. It is equipped with a gasoline 2.0T four-cylinder engine, automatic transmission, and all-wheel drive. The decoded configuration lists seating for seven across three rows. Four NHTSA safety recalls are listed for this model and year: a front shock absorber fork recall due to possible cracking, a C-pillar padding recall, a steering shaft bolt recall that may result in loss of steering control, and a side-curtain airbag recall involving improper inflation. Recall completion should be verified with an Audi dealer using the VIN before purchase.