2015 AUDI Q7 S Line Prestige

The auction record lists the vehicle’s condition as “CERTIFICATE OF TITLE” and identifies “FRONT END” as the primary damage classification. Stage 1 reports that the visible front-end damage supports the unverified “FRONT END” classification; however, a certificate of title could not be confirmed from the photos. The primary damage is concentrated at the front-left corner. The hood has a raised, buckled section and a deformed edge above the left headlamp, resulting in an uneven gap with the adjacent headlamp and fender. The front bumper cover is severely cracked and broken, with separated pieces, exposed areas, missing trim, and a large open damaged section. The lower bumper lip and adjacent trim are detached and hanging away from the bumper, while portions of the lower edge are separated. The extent of any damage behind the visible bumper and hood areas is not specified and should be assessed during a physical inspection. Inside, the driver’s seat outer leather bolster shows creasing and surface wear. The leather steering-wheel rim also has visible smoothing and wear. According to the VIN decode, this is a 2015 Audi Q7 SUV with the S line Prestige trim, a 3.0T gasoline V6 engine with approximately 2.967 litres of displacement, manufactured by Audi AG in Slovakia. The decoded information lists front and side airbags for the first row and curtain airbags for all rows. Drive type and transmission details were not provided. Two NHTSA recalls are listed for this vehicle’s model and year. Recall 17V298000 concerns a fuel-pump flange that may crack and allow a fuel leak, increasing the risk of fire; the remedy involves inspection and replacement or application of protective film as applicable. Recall 23V086000 concerns an incorrect rear gross axle weight rating on the certification label; the remedy is installation of a corrected overlay label. Recall completion should be verified with Audi or an authorized dealer using the VIN.