2023 AUDI Q7 quattro Premium

The auction lists the vehicle with a salvage title and “FRONT END” as the primary damage classification. Stage 1 reports that the visible evidence supports this unverified auction claim, with substantial damage observed at the hood, grille, headlamp area, bumper, and front fender. The 2023 Audi Q7 has severe collision damage concentrated at the front. The hood’s leading edge is raised and deformed, with a wide uneven gap above the front fascia. The front fender is crushed and torn around the wheel arch, exposing wheel-well components. Large sections of the front bumper and lower fascia are missing or broken, leaving internal components and wiring visible. The center grille is broken or absent, the Audi emblem is displaced and hanging forward, and the vehicle’s right-front headlamp assembly appears to be missing or substantially absent. With the hood open, multiple front-end components are exposed through the damaged grille and bumper areas. The roof curtain airbag and additional airbag fabric beside the front passenger seat are visibly deployed. This indicates that the restraint system will require detailed inspection and likely replacement of affected airbags and related components. The extent of structural, cooling-system, wiring, sensor, lighting, and driver-assistance-system damage cannot be determined from the supplied findings alone. A comprehensive physical inspection and diagnostic scan are recommended before purchase or repair planning. Factory VIN data identifies this vehicle as a 2023 Audi Q7 quattro Premium SUV, built in Slovakia, with a 3.0-liter six-cylinder 55 TFSI gasoline engine, mild-hybrid system, automatic transmission, and all-wheel drive. NHTSA records list three recalls for this model and year: recall 23V868000 concerns possible improper mounting of the driver’s seat side airbag; recall 24V251000 concerns the front passenger occupant-detection system, which could deactivate the passenger airbag; and recall 25V900000 concerns rearview-camera software that may prevent the camera image from displaying correctly. Recall completion status for this vehicle should be confirmed by VIN with Audi or NHTSA before operation.