2025 AUDI Q7 quattro Premium Plus

The auction record lists the vehicle as having a Certificate of Salvage and identifies “UNDERCARRIAGE” as the primary damage classification. However, the supplied assessment states that undercarriage damage cannot be confirmed from the available images and requires a physical inspection. The assessment instead identifies concentrated damage at the left front exterior and deployed airbags. The Certificate of Salvage status also cannot be verified from the images. The left front bumper cover is severely damaged, with part of the outer corner missing below and beside the headlamp. Inner components and mounting points are exposed. The black wheel-arch and bumper-edge trim is also missing, leaving an open gap around the wheel arch, and light scuffing is visible on the remaining bumper surface. A separate long, curved black exterior trim piece is present, but its original installed location and attachment condition cannot be determined. The driver’s steering-wheel airbag is deployed, and curtain airbags are deployed along the roof-side areas of the cabin. These findings indicate that the vehicle requires replacement of deployed restraint-system components and a full inspection of the related safety systems before it can be considered roadworthy. The condition of the underlying structure, suspension, steering, cooling system, lighting, wiring, and other components is not established by the supplied findings. VIN decoding identifies this vehicle as a 2025 Audi Q7 quattro Premium Plus SUV with all-wheel drive, a 3.0-liter turbocharged six-cylinder 55 TFSI gasoline engine with mild-hybrid technology, and an automatic transmission. It was manufactured by Audi AG in Bratislava, Slovakia. Two NHTSA recall records are listed for this 2025 Audi Q7. Recall 25V777000 concerns potentially missing rivets securing the driver and front-passenger seat belt buckles; the remedy is replacement of both front seat belt buckles at no charge. Recall 25V900000 concerns a software error that may prevent the rearview camera image from displaying correctly; the remedy is a free software update. Recall completion should be confirmed with Audi or an authorized dealer using the vehicle identification number. A comprehensive physical inspection is recommended, including the undercarriage, structural measuring, suspension and steering components, airbag and seat-belt systems, electronic control modules, wiring, and a complete diagnostic scan.