2017 AUDI Q7 quattro Premium Plus

This 2017 Audi Q7 is listed by the auction with a salvage certificate and a claimed damage level of more than 75%, with “front end” recorded as the primary damage. The photo-based assessment supports visible front-end damage but does not support or establish that the vehicle has more than 75% damage. The auction designation and the photo-based verdict should therefore be treated as separate points, and the claimed damage percentage requires independent verification. The visible exterior damage is concentrated on the left side of the front bumper. Multiple dark scuffs, abrasions, and paint-transfer marks are present around the headlamp area and lower corner. The lower-left bumper has an open cavity where the corresponding black trim or grille insert is missing. These items are classified as moderate collision damage. No additional damage is established by the provided findings. The brown leather driver’s seat cushion has pronounced creasing and surface abrasion, with peeling or worn areas along the outer front section. This is classified as minor cosmetic wear. According to the VIN decode, the vehicle is a Q7 Sport Utility Vehicle with a 3.0-liter six-cylinder gasoline engine, automatic transmission, and all-wheel drive. It is identified as the quattro Premium Plus trim, with three seating rows and capacity for seven occupants. The vehicle was manufactured by Audi AG in Slovakia. NHTSA records list several recalls applying to certain 2017 Audi Q7 vehicles. These include potential fuel-rail leaks, a third-row seat-back support issue, seat-belt pretensioner operation, electric power-steering assist, side-marker-light software, frontal air-bag control-module software, and a steering-shaft bolt that may loosen. Recall applicability can depend on production date and vehicle configuration; completion status for this VIN is not provided. An Audi dealer or NHTSA VIN lookup should be used to confirm which campaigns apply and whether the repairs have been completed. A detailed physical inspection is recommended, including checks behind the front bumper, the headlamp mounting area, front crash structures, cooling and air-conditioning components, steering and suspension, safety systems, wheel alignment, and the condition of all missing trim and mounting points.