2017 AUDI Q7 quattro Premium Plus

The auction record identifies this 2017 Audi Q7 as having a salvage title and lists FRONT END as the primary damage. Stage 1 reports that the visible severe front-end damage supports the stated front-end claim; however, the salvage-title status cannot be confirmed from photographs alone. The vehicle has extensive collision damage at the front. The front bumper cover and surrounding components are severely broken or missing, with internal parts and wiring exposed. The headlamp at the front corner shown on the viewer’s right is missing, and the corresponding fender is crushed and heavily creased around the wheel opening. The hood has an uneven front edge and an enlarged, irregular gap above the grille and headlamp area, along with several surface scuffs. Lower bumper trim and grille inserts are also missing, leaving open cavities on both sides of the lower front fascia. Additional severe damage is visible at the rear quarter panel above and forward of the rear wheel. The panel has extensive denting, sharp creases, and folded metal around the wheel arch and rear-door edge. The adjacent rear door has moderate deformation and irregular creasing near its trailing edge. The driver steering-wheel airbag and curtain airbags are visibly deployed. Curtain-airbag fabric is hanging along both roof-side areas behind the front seats. Airbag-system components, seat-belt pretensioners, structural areas, wiring, and other hidden mechanical or electrical systems require a complete physical inspection; their condition cannot be determined from these findings alone. According to the VIN decode, this is an all-wheel-drive Audi Q7 SUV with a 3.0-liter six-cylinder gasoline engine, automatic transmission, seven-seat configuration, and Premium Plus quattro trim. The vehicle was manufactured by Audi AG in Slovakia. NHTSA records show recalls associated with this model and year involving the fuel rails, third-row seat support, seat-belt pretensioners and certain airbags, electric power steering, side-marker-light software, airbag-control-module software, and a steering-shaft bolt. Recall completion should be verified by VIN through an Audi dealer before purchase, particularly given the visible airbag deployment and collision damage.