2018 AUDI Q7 3.0T PREMIUM

The 2018 Audi Q7 is listed with a salvage condition designation. The auction’s primary-damage code is “Rear.” Stage 1 reports that the visible evidence supports the “Rear” classification through extensive damage to the rear bumper, left rear quarter panel, and left rear tail lamp. The salvage title or condition cannot be independently verified from exterior photographs. The most significant damage is concentrated at the left rear corner. The left rear quarter panel is severely crushed, creased, and displaced around the wheel arch and tail-lamp opening, with open gaps exposing components behind the bodywork. The rear bumper cover is detached and displaced downward and rearward, with broken mounting areas and exposed reinforcement, wiring, and other internal components. The left rear tail-lamp assembly is broken, with missing or displaced lens sections and exposed internal parts. Additional visible damage includes a torn section of the black insulation panel on the right side of the hood underside and several dark surface scuff marks on the left front fender near the headlamp. The findings do not establish the condition of concealed structural, suspension, electrical, mechanical, or safety-system components. A thorough physical inspection and diagnostic assessment are recommended before purchase. VIN decoding identifies this vehicle as a left-hand-drive Audi Q7 Sport Utility Vehicle with all-wheel drive, a 3.0-liter six-cylinder gasoline engine, automatic transmission, and the quattro Premium Plus trim. The vehicle was manufactured by Audi AG in Bratislava, Slovakia. NHTSA recall records provided for this model and year include a fuel-rail leak recall (19V035000), a C-pillar padding recall (20V658000), and a steering-shaft bolt recall (20V149000). The associated remedies should be verified with Audi or an authorized dealer to confirm whether they were completed for this vehicle.