2016 AUDI Q5

The auction record identifies this 2016 Audi Q5 as having a “CERT OF TITLE SLVG REBUILDABLE” designation with “FRONT END” listed as the primary damage. Stage 1 reports that the visible front-end damage supports the auction’s FRONT END classification; however, the salvage/rebuildable title status cannot be confirmed from photographs. The vehicle has extensive collision damage concentrated at the front. The front bumper cover is detached and hanging away from the body, with internal components and broken mounting areas exposed. The right headlamp assembly is missing, and the center grille is displaced and hanging below its normal position. Sections of the right and center front fascia are absent, exposing the radiator, wiring, and other front-end components. The right lower bumper and fog-lamp surround are broken or separated, while multiple bumper, grille, lamp, and underbody components are detached and lying on the ground. The leading edge of the hood is visibly deformed, with an uneven raised gap above the exposed front-end area. A rectangular section is also missing from the right side of the rear bumper, in the reflector or trim area. The instrument cluster displays check-engine, EPC, traction-control, and ABS warning indicators. These warning indications are qualitative concerns requiring diagnostic inspection; the available findings do not establish their underlying causes. According to the VIN decode, this is a Germany-built 2016 Audi Q5 SUV with all-wheel drive, a 2.0-liter four-cylinder gasoline/E85 engine, and an automatic transmission. Official NHTSA recall records list several campaigns applicable to this model and year, including recalls involving the auxiliary-heater wiring connector, the electric coolant pump, the sunroof drainage system and side-curtain-airbag inflator area, and the fuel-pump flange. The records describe potential fire, water-intrusion-related airbag, or fuel-leak risks and specify manufacturer remedies; completion of these repairs on this vehicle is not established by the provided information. A thorough inspection should include the complete front structure, cooling system, wiring, lighting, airbags and restraint systems, underbody, drivetrain, diagnostic fault codes, and verification of all recall repairs before purchase or road use.