2024 AUDI Q5

The auction lists this 2024 Audi Q5 as having a Salvage condition and “Right Side” primary damage. Stage 1 reports that the photographs show extensive front-end damage and missing front components, which do not support the auction’s “Right Side” primary-damage code. The Salvage title status cannot be confirmed from photographs. The vehicle has severe front-end damage. The front bumper cover and lower front trim are missing, exposing the cooling components and front mounting areas. The front grille is absent from the vehicle; the detached grille assembly is also shown on the ground. Both headlamp assemblies are detached and lying on the ground, and both headlamp positions are empty. The front fender panels are missing on both the left and right sides, exposing the wheel-well liners and internal mounting areas. Multiple electrical wires, connectors, and harness sections are exposed and hanging below the front end. The front edge of the hood has visible creasing and an uneven raised contour. Several light linear scratches and white scuff marks are present across the lower rear bumper cover. The instrument display reportedly indicates an “Audi adaptive light: malfunction! See owner’s manual” message. An amber check-engine warning indicator is also illuminated; the available information does not establish the cause of either warning. These systems should be diagnosed after the vehicle is fully repaired. According to the VIN decoding, this is a 2024 Audi Q5 quattro Premium SUV with all-wheel drive, a 2.0-liter turbocharged four-cylinder gasoline engine rated at 201 horsepower, and an automatic transmission. The vehicle was manufactured by Audi AG in Mexico. Official NHTSA recall records provided for the 2024 Audi Q5 include campaign 23V842000 concerning overheating of certain 220V/240V portable charging cables, campaign 24V251000 concerning the front passenger occupant-detection system and possible airbag deactivation, campaign 25V080000 concerning potential high-voltage battery overheating, and campaign 25V294000 concerning improperly tightened cylinder-head-cover screws that may allow an oil leak. Recall applicability, completion status, and any required repairs should be verified by VIN with Audi or an authorized dealer.