2020 AUDI Q5 quattro Premium

The 2020 Audi Q5 is listed with a salvage certificate of title and an auction primary-damage classification of FRONT END. The visible missing front bumper, grille/fascia sections, and exposed front-end components support the stated FRONT END classification. The salvage-title status itself cannot be confirmed or contradicted from exterior photographs alone. The front bumper cover and surrounding fascia are absent, particularly across the front-left corner. The center grille and lower front coverings are also missing, leaving the radiator area, front reinforcement beam, hoses, brackets, and other internal components exposed. The lower front splash panel, both front corner trims, and the black trim around the front-left wheel arch are missing or incomplete. These areas will require a detailed inspection to determine whether any underlying structural, cooling, lighting, sensor, suspension, or mechanical components were damaged. Light surface scuffs are visible along the left front and rear doors, lower left-side body, right-side doors, and lower rocker-area trim. According to the VIN decoding, this vehicle is a gasoline-powered, four-cylinder 2.0-liter Audi Q5 SUV with automatic transmission, quattro all-wheel drive, and the Premium trim designation. The vehicle was manufactured in Mexico. The supplied NHTSA recall records include recalls concerning rear-axle lock nuts and alignment, a gateway control module that may be affected by liquid intrusion, front-seat frame or backrest welds, rear wheel-arch trim attachment, and a 220V/240V charging cable issue listed for certain Audi vehicles including the Q5. Recall completion should be verified by VIN with an Audi dealer, particularly because of the vehicle’s salvage status and the extent of the front-end damage.