2019 AUDI Q5 quattro Premium

The vehicle is listed with a salvage certificate of title and FRONT END as the auction’s primary-damage classification. Stage 1 reports that the visible extensive front-end damage supports the FRONT END classification; however, the salvage certificate status cannot be confirmed from photos. The front end has severe collision damage. The hood is visibly bent and heavily creased across its front section, with the leading edge raised and an uneven gap above the front-end components. The front bumper cover is extensively broken, with torn and missing sections at the center and both lower corners. Internal components are exposed. The Audi grille and surrounding trim are displaced, cracked, and separated from the fascia, while substantial portions of the lower fascia and corner trim are missing. Visible front radiator-support members and surrounding brackets are bent and irregular, with displaced panels and mounting components around the radiator area. The heat-exchanger core is exposed, and its visible lower edge appears deformed. The driver airbag has deployed from the steering wheel. The findings do not establish the condition of other airbags, restraint-system components, engine, cooling system, steering, suspension, drivetrain, or structural areas not visible in the provided findings. A thorough physical inspection and diagnostic evaluation are recommended before purchase or repair. According to the VIN decode, this is a 2019 Audi Q5 quattro Premium SUV with all-wheel drive, a 2.0-litre four-cylinder gasoline engine, automatic transmission, and seating for five. The vehicle was manufactured by Audi AG in Mexico. NHTSA records list five recalls for this make, model, and year: a gateway control-module issue involving possible liquid intrusion and sudden engine-power reduction; wheel-arch trim that may loosen and detach; a passenger frontal-airbag and instrument-panel-carrier issue; rear wheel-arch trim that may loosen and detach; and a brake master-cylinder casting issue that may cause sudden brake loss. Recall completion should be verified with Audi or an authorised dealer using the VIN before the vehicle is operated.